Started by xrayone, 30. December 2011 kl. 18:23:06

Previous topic - Next topic


Hi all Ive been shooting blackpowder cartridges for over 10 years and I'm wondering if anyone has come up with a quicker way of cleaning their brass,
as I drop them in soap and water at the range. Then clean them when I get home
I normally shoot about a 100 to 200 45-75 WCF in a Win.76 reproduction rifle and about the same in 45 Long Colt I also shoot a .577/.450 Martini-Henry rifle made by Greener and use it about 6 to 8 times a year and shoot about 15 to 30 rounds.

Best regards



I use a ultrasonic cleaner with soap water, after soap water i use clean water. and then i use citric acid and water if they are really dirty.
after the CA mix i rinse them off i hot tap water
i suggest that u decapp them first for cleaning of the primer pocket.

There is an article here that explains the process.
Samler på sisteplasser.
Skytter ikke samler.
Lytt til erfaringer.
Gode råd som det å tru og synsing funker kanskje når du har prøvd rådene fra en med erfaring.


Thanks for the information nevS I'll give that a go.

Best regards