Equipment to remove the bullet from the barrel

Started by Erlend Solvoll, 17. June 2013 kl. 14:48:21

Previous topic - Next topic

Erlend Solvoll

Someone who can help me with such exuipments?  

Regards  Erlend S



The standard method is to use a worm to remove the bullet. There are a couple of types, get the right one for the bullet that you put down that bore. It screws into the bullet and then you drag it back out through the muzzle.

Øyvind F.

Here's a homemade one version. Although I don't like the exposed threads on the rod, it does the job:

[flash width=720 height=450][/flash]
Øyvind F. - forum admin
Ta også en kikk på


put a compressor to the nipple and blow it out.