18. January 2022 kl. 21:10:16

Author Topic: Equipment to remove the bullet from the barrel  (Read 4644 times)

17. June 2013 kl. 16:48:21
Read 4644 times

Erlend Solvoll

Someone who can help me with such exuipments?  

Regards  Erlend S

18. June 2013 kl. 10:43:11
Reply #1



The standard method is to use a worm to remove the bullet. There are a couple of types, get the right one for the bullet that you put down that bore. It screws into the bullet and then you drag it back out through the muzzle.

18. June 2013 kl. 10:52:13
Reply #2

Øyvind F.

Here's a homemade one version. Although I don't like the exposed threads on the rod, it does the job:

[flash width=720 height=450]http://www.youtube.com/v/q0CrbWJzmwg?version=3&hl=en_US[/flash]
Øyvind F. - forum admin
Ta også en kikk på kammerlader.no.

27. February 2016 kl. 16:56:12
Reply #3


put a compressor to the nipple and blow it out.