forum.svartkrutt.net

English => Kammerlader => Topic started by: bgeipel on 27. April 2021 kl. 21:19:05

Title: What percussion caps fit a Kammerlader?
Post by: bgeipel on 27. April 2021 kl. 21:19:05
I have a 1849/55 Kammerlader is great condition. I was wondering what percussion caps people are using. On mine. commercially available musket caps are too large and #11 and #12 percussion caps are too small.

Right now I am pinching musket caps to try to get them to stay on the nipple, but about half of them fall out when I close the chamber.

Surely there must be a good way to use modern caps?

Barry
Title: Re: What percussion caps fit a Kammerlader?
Post by: Cap'n Redneck on 27. April 2021 kl. 21:59:41
If You can get hold of the "RWS # 1218" musket caps with 6 wings, then they are a tad smaller than the "RWS # 1081" musket caps with 4 wings, and should stay more securely on the original nipple of a Kammerlader.
Title: Re: What percussion caps fit a Kammerlader?
Post by: jæger justnæs on 28. April 2021 kl. 11:53:01
I once cut the front of a spent .22LR cartride and stuck it on. Not sure if I used some epoxy, or if it was a friction fit only. Let the front with a slight bevel pointing out, somewhat lower than the top of the nipple. Worked pretty good with standard musket caps. Will add picture if I still have it.

Edit: Found it! It was pretty worn out and hammered flat, so it is shorter than a 'new' one. Also had a scew installed as a sleeve, the inside cone was very burnt out.


Title: Re: What percussion caps fit a Kammerlader?
Post by: jæger justnæs on 28. April 2021 kl. 12:24:49
Ah, forgot to upload both pictures and editing time was out. Here is a side view:

Title: Re: What percussion caps fit a Kammerlader?
Post by: bgeipel on 28. April 2021 kl. 13:18:24
Can seem to find any RWS 1218 caps available in the US right now, but I will look at Friendship in June (our biggest black powder event in the USA)

I will test the .22 LR idea as well!

Last night I tried fitting a CCI musket cap - it too was way to big, but it seemed to respond to being pinched to size a bit better than my RWS 1018 caps

Thanks!