20. October 2021 kl. 16:19:09

Author Topic: Removing jarman bolt  (Read 1042 times)

30. November 2020 kl. 6:33:52
Read 1042 times


Hi guys
This may seem like a dumb question but I was wondering how you remove the bolt from a jarmann.  I have a Swedish one and I'm in Australia so info is a bit scarce here.
Do I need to remove the screw behind the cocking piece (it is broken but I think I can get it out) or is there a trick to lifting the extractor out.?
Any help would be greatly appreciated.

30. November 2020 kl. 7:47:38
Reply #1

Øyvind F.

You simply lift up the extractor while you pull the bolt back. See the attached image.
Øyvind F. - forum admin
Ta også en kikk på kammerlader.no.