27. July 2021 kl. 4:58:25
forum.svartkrutt.net

Author Topic: What percussion caps fit a Kammerlader?  (Read 861 times)

27. April 2021 kl. 21:19:05
Read 861 times

bgeipel


I have a 1849/55 Kammerlader is great condition. I was wondering what percussion caps people are using. On mine. commercially available musket caps are too large and #11 and #12 percussion caps are too small.

Right now I am pinching musket caps to try to get them to stay on the nipple, but about half of them fall out when I close the chamber.

Surely there must be a good way to use modern caps?

Barry

27. April 2021 kl. 21:59:41
Reply #1

Cap'n Redneck


If You can get hold of the "RWS # 1218" musket caps with 6 wings, then they are a tad smaller than the "RWS # 1081" musket caps with 4 wings, and should stay more securely on the original nipple of a Kammerlader.
Sålenge det er bly i lufta, er det fortsatt håp......

28. April 2021 kl. 11:53:01
Reply #2

jæger justnæs


I once cut the front of a spent .22LR cartride and stuck it on. Not sure if I used some epoxy, or if it was a friction fit only. Let the front with a slight bevel pointing out, somewhat lower than the top of the nipple. Worked pretty good with standard musket caps. Will add picture if I still have it.

Edit: Found it! It was pretty worn out and hammered flat, so it is shorter than a 'new' one. Also had a scew installed as a sleeve, the inside cone was very burnt out.


« Last Edit: 28. April 2021 kl. 12:10:07 by jæger justnæs »
Best når det smeller!

28. April 2021 kl. 12:24:49
Reply #3

jæger justnæs


Ah, forgot to upload both pictures and editing time was out. Here is a side view:

« Last Edit: 28. April 2021 kl. 12:26:45 by jæger justnæs »
Best når det smeller!

28. April 2021 kl. 13:18:24
Reply #4

bgeipel


Can seem to find any RWS 1218 caps available in the US right now, but I will look at Friendship in June (our biggest black powder event in the USA)

I will test the .22 LR idea as well!

Last night I tried fitting a CCI musket cap - it too was way to big, but it seemed to respond to being pinched to size a bit better than my RWS 1018 caps

Thanks!