30. November 2020 kl. 20:56:17
forum.svartkrutt.net

Author Topic: Rolling block firing pin  (Read 14256 times)

20. February 2007 kl. 20:14:10
Read 14256 times

Richard Thomas

Guest
Anyone know where I can get a firing pin for a Swedish rolling block rifle?

20. February 2007 kl. 22:43:58
Reply #1

Jaeger Justnaes

Guest
They're quite easy to make by simple methods: an iron rod in a drill and a file will get you there although it may turn out too "soft". Or seek your local gunsmith. Don't think anyone sells them by the dozen.

Good luck and welcome to the board!

22. February 2007 kl. 22:52:34
Reply #2

Dean

Guest
> Anyone know where I can get a firing pin for a Swedish rolling block rifle?

Perhaps this is the link you need: http://www.wisnersinc.com/rifles/remington/roll_block.html Don't know if it fits your Swede though. Perhaps you can combine Jaeger Justnaes's file and these pins? If they don't fit I mean.

25. January 2008 kl. 2:36:05
Reply #3

Ken/Kebco


> Anyone know where I can get a firing pin for a Swedish rolling block rifle?

Which model (67 or 89) do you need a firing pin for?  I have some new pins for the 89 version